Pilz PSENvip RL D P Manuale Utente Scaricare il pdf (Pagina 92)

7.2 Initial commissioning

7 Commissioning

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-8

Examples of the correct adjustment of various tool types:

Tool class 1: Pointed tools

For these tools we recommend alignment to

the left-hand bending line. The distance from

the bending line to the front segments of the

protected field is >15 mm.

Tool class 2: Semi-circular tools

For these tools we recommend alignment to

the left-hand bending line. The distance from

the front bending line of the tool to the front

segments of the protected field is <15 mm.

The rear bending line of the tool is detected

by the protected field. The position of the

front bending line must be considered in the

hazard analysis.

Tool class 2: Stamp

For these tools we recommend alignment to

the central bending line. The distance from

the front bending line of the tool to the front

segments of the protected field is <15 mm.

The rear bending line of the tool is detected

by the protected field. The position of the

front bending lines must be considered in the

hazard analysis.

Tool class 3: Stamp

The front and rear bending lines of the tool

are outside the protected field. The position

of the bending lines must be considered in

the hazard analysis.

> 15 mm

< 15 mm

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 156 157

Nessun commento

Pilz PSENvip RL D P Manuale Utente Pagina 92